تاریخ انتشاردوشنبه ۱۹ آبان ۱۳۹۹ - ۲۲:۳۵
شرکت خدمات نفت و گاز وود پی ال سی در قزاقستان در قزاقستان استخدام می کند.
اخبار استخدامی | نفت آنلاین  استخدام شرکت ووود پی ال سی
اخبار استخدامی | نفت آنلاین استخدام شرکت ووود پی ال سی

فرصت های شغلی شرکت خدمات نفت و گاز Wood PLC در قزاقستان –8 نوامبر 2020:
(برای اطلاعات بیشتر روی عنوان شغلی کلیک نمائید)
 
Lead Instrument Designer
Wood (trading locally as PSNK) is currently looking for a Lead  Instrument Designer to join our team in Atyrau. We are looking for candidates with the drive and commitment to make a genuine difference to our performance to ensure that the company continues to differentiate itself from competitors by delivering quality projects to our client’s requirements   - Participate in mentoring and guidance of National designers - Prepare project drawings and documents using the appropriate software. - Check designs and drawings of the design team for accuracy and conformance to technical specifications and procedures - Ensure all relevant specifications, codes, standards and procedures and technical instructions from engineering are being correctly applied - Assist in resolution of technical queries, liasing with engineering and site as required, - Ensure deliverables are completed within budget and time schedule.
Requisition ID
 
2020-79864
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Fixed Term
 
 Type of Requisition
 
Professional & Technical
Job TitleEstimating Engineer
Wood (trading locally as QED International) is currently looking for Estimating Engineer to join our client NCOC in Atyrau. (for locals).   - Producing and documenting cost estimates through the development of a technical report and estimate basis. - Maintain the audit trail and estimate development history through the lifecycle of the estimate. - Develop and maintain a database of cost estimates, norms and estimates-versus-actual cost comparisons - The job holder is responsible for: - Ensure all activities are conducted and managed in accordance with agreed HSSE practices and procedures. - Responsible to Support Estimating Team Lead for managing all estimating issues and interface with cost control and schedule functions. Oversee and contribute to the preparation and evaluation of cost estimates for the project. - Prepare estimates from Conceptual through Order of magnitude to Detailed estimates for identified projects within the company. - Overall in charge of the estimating unit in creating budget from conceptual phase up to controlled estimate - Contribute to the development of the projects risk profiles and translate these into the estimates using deterministic and probabilistic analysis methods, as appropriate. - Provide estimate risk analysis for all assigned projects (deterministic & probabilistic). - Liaise with and challenge project engineering personnel to ensure proper understanding of the key estimate sensitivities and drivers. - Identify alternative execution methodologies to optimize cost. - Build and maintain an estimate database, capturing historical data applicable for all future works and benchmarking. - Maintain an overview of the cost estimates through the various steps of the maturation process. - Compare the as-built cost with the various cost estimates, and subsequently update the norms database - Build and develop networking opportunities. Identify and implement applicable improvements.
Requisition ID
 
2020-79863
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Agency / Contract
 
 Type of Requisition
 
Professional & Technical
Job TitleSenior Electrical Engineer
Wood (trading locally as PSNK) is currently looking for a Senior Electrical Engineer (for KZ Nationals) to join our team in Aktau.  - Liaising and co-ordinating with other discipline groups on specific projects to ensure deliverable are produced to meet deadlines and within budget constraints - Producing and reviewing documents, study report and design calculations and ensuring conformance to engineering quality and competence - Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials and difficult co-ordination requirements. - Provides technical guidance to designers and less experienced engineers
Requisition ID
 
2020-79860
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Aktau
 
Vacancy Type
 
Fixed Term
 
 Type of Requisition
 
Professional & Technical
Job TitleLead Civil/Structural Engineer
Wood (trading locally as PSNK) is currently looking for a Lead Civil/Structural Engineer to join our team in Atyrau (for KZ Nationals). We are looking for candidates with the drive and commitment to make a genuine difference to our performance to ensure that the company continues to differentiate itself from competitors by delivering quality projects to our client’s requirements.   Responsibilities: - Responsible for the management of Civil/Structural Discipline - Responsible for structural analysis, design, specification and services related to concrete and steel structures for pipe racks, pipe bridges, buildings, and all types of oil-field infrastructure - Check calculations and designs by National engineers and provide feedback to encourage them to improve their engineering skills - Provide engineering input to Basis of Design, Design Reports and FEED studies - Supervise preparation of Job Packs and Material Requisitions - Under general supervision, independently applies advanced engineering techniques, makes decisions on engineering problems and methods, and represents the organization in conferences to resolve important questions or to negotiate with key engineers and officials of other organizations - Provides technical guidance to designers and less experienced engineers and is consulted extensively by associates and others - Provides mentoring and training to National engineers - Will have demonstrated creativity, foresight, and mature engineering judgment in anticipating and solving engineering problems efficiently and economically. Will usually be a Licensed/Chartered Professional Engineer - Typical work scope for the Civil/Structural group includes: steel pipe-racks, and bridges, access stairs and platforms, buildings, reinforced concrete foundations and below ground structures, earthworks, roads, drainage, and occasional architectural work - As the Lead, plans, budgets, organizes, coordinates and controls the project and is responsible for employee performance appraisals and for coaching and developing lower level professionals
Requisition ID
 
2020-79852
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Fixed Term
 
 Type of Requisition
 
Professional & Technical
Job TitleProject Supervisor (OR&A)
WOOD (trading locally as QED International) is currently looking for Project Supervisor (OR&A) to join our client NCOC in Atyrau 5/2 (residential job for expats).   OR&A Supervisor will be responsible for the development, coordination and verification of OR&A/CSU deliverables during Pre-FEED stage to ensure the Project is ready to move to the next stage. This will also include work prioritization and coordination with other department heads within NDD, POD, TD and Engineering contractors   - Be a Visible Leader of HSSE to achieve GOAL ZERO - Ensure compliance with Project HSSE assurance activities in line with project assurance processes - Represent POD within the project team by ensuring the Operations and Maintenance (O&M) requirements will be incorporated in the design. This may be done via incorporating the existing NCOC O&M best practices, procedures and inputs received from POD O&M teams - Develop the Project Operations Readiness & Assurance (OR&A) plan(s) and lead through implementation between Project Team, Engineering Contractor and POD all the way from early - Project phases up to start up (i.e. from Concept select to Execution) - Incorporate O&M inputs and review the key project documents such as FEED Scope of Work (SoW), Invitation to Tender (ITT), Scope of Requirements (SoR), Basic Design Package, Basic - Design Engineering Package and other key documents whichever relevant - Develop Project OR&A roadmap and manage through implementation between Engineering contractor, Project team and POD - Act as main interface between Project team(s) and POD on anything related to OR&A/CSU during Project phase - Provide Execution, CSU and Operations input into Project(s) activities including HAZOP’S, HAZID’S, QRA, RAM, 3D Model Workshops, SILs, FATs, SATs, SPO and operational reviews - Responsible for the Development/update of the Operations& maintenance philosophy for the Project - Responsible to ensure the project logistics philosophy to be in place and well reviewed by NCOC - Logistics department. The logistics philosophy should outline the Operate phase requirements where Logistics specialist support may be required to develop or update the document. - The NCOC logistics constraints need to be clearly highlighted in the document - Participate in the project(s) evaluation reviews relevant to each project definition phase, including preparation of deliverables and follow-up of recommendations - Develop OR&A KPIs and progress reporting tools and trackers. Responsible for data collection and progress reports preparation & presenting to Senior Management - Provide Execution, CSU and Operations input into the review of engineering documents such as engineering drawings, concept study report, etc. - Lead the key stakeholders to identifying and consolidating all of the operating mode requirements for the project by engaging various parties from operations, maintenance, process, discipline engineers, commissioning and start-up team - Develop activity based OPEX estimation for project life cycle for a given concept and take ownership to pass SME review. To work closely with the local content department to estimate the local content OPEX level in the estimate    
Requisition ID
 
2020-79848
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Agency / Contract
 
 Type of Requisition
 
Professional & Technical
Job TitleCorrespondence Advisor
Wood (trading locally as QED International) is currently looking for Correspondence Advisor to join our client NCOC in Atyrau (temporary position for 2-4 months) only for locals. Responsibilities: - Participate proactively in designing, formalization, regular update and implementation of the company business process on management of all formal correspondence and communications with the governmental agencies, local executive authorities, Contracting Companies and other high profile stakeholders (KAZENERGY Association etc.) - Act as a part of the Correspondence team as the single point of entry and exit for all formal correspondence and communications with high profile stakeholders; provide advice on historical information; manage flow of the formal correspondence: - Check arrival of incoming correspondence and communications on regular basis via company functional email account and mailroom; make first review of the incoming correspondence to ascertain an addressor and an addressee, content/nature of the addressor’s concerns and to judge on if it is to be registered with the company formal correspondence database (FCD) - In regard to the incoming formal correspondence from the high profile stakeholders addressed to Managing Director or the company requiring formal written reply: make acknowledgement call or type message to the addressor, where appropriate; judge on the company’s feasibility to comply with the addressed request and clarify it, if unclear issues following the existing process and the related procedural documents (in particular, incoming correspondence distribution matrix), determine a responsible party within the company to prepare or coordinate preparation of formal written reply; if and where required, confer with subject matter experts or extended leadership team members in regard to appointment of a responsible party register incoming correspondence with the FCD by filling in all the required fields, including brief summary on the content, deadline for provision of reply, make other required arrangements and forward it to appointed responsible party for action - In regard to formal outgoing correspondence: signed by company representatives other than Managing Director or his/her delegee - check it for compliance with the internal company requirements, register with FCD, arrange dispatching, verify receipt by an addressee and confirm the receipt to the company responsible party to be signed by Managing Director or his/her delegee – make sure that Director of the related directorate approved release of the drafted company reply, review draft for company legal requisites, format, typographical accuracy, compliance with NCPSA and JOA terminology, check availability and correctness of attachments, number of copies, submit it to Legal Managing Counsel (PSA & JOA Compliance) review and, once reviewed, submit to Managing Director or his/her delegee for signature - Act as an administrator of FCD, monitor its performance, advise Correspondence Coordinator of any necessary interventions; ensure daily quality assurance and quality control of all entries into the database and trace incorrect entries on weekly basis - Ensure incoming correspondence requiring company written is responded on time: run and submit open incoming correspondence reports to Directorate/Department Administrators first and then, if no progress, to Directors - Maintain confident climate, effective communication and working relationship with all stakeholders; liaise on regular basis and work collaboratively with all company directorate leadership teams, subject matters experts, directorate/department administrators etc. to support an effective formal correspondence management and control requirements in the area - Work closely with Shareholders & Authority Relations and Reporting departments under Strategy & Business directorate as well as Legal directorate – in regard to exchange of information, alignment on same information to be released in regard to the company position on various business issues, interaction with internal and external stakeholders, information submission deadlines, compliance with requirements of the RoK legislation, NCSPSA and JOA and internal approval authority issues etc. - Archive both incoming and outgoing correspondence with FCD, other database where applicable (e.g. EDMS for reporting), hard copies (outgoing ones in case of special request from responsible parties); make periodic inventory of the archive
Requisition ID
 
2020-79847
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Agency / Contract
 
 Type of Requisition
 
Professional & Technical
Job TitleLead Planner
Wood (trading locally as PSNK) is currently looking for a Lead Planner (for KZ Nationals) to join our team in Tengiz. We are looking for candidates with the drive and commitment to make a genuine difference to our performance to ensure that the company continues to differentiate itself from competitors by delivering quality projects to our client’s requirements. This position requires a Lead Planning Engineer who can be hands on in producing daily detailed planning deliverables and work as part of the team whilst also being able to review and plan at a strategic level to maximise schedule performance.   Responsibilities: - Liaise with Construction Managers, Completion Managers/ Project Controls Manager and Lead Planning Engineer (Atyrau) and others as appropriate to identify and quantify project scope - Prepare plans in conjunction with those responsible for their execution, for all project work in accordance with project procedures - Development, management and distribution of Level 1, 2, 3 and 4 project plans as required for each element of work authorised by the Client - Review externally produced plans to ensure they comply with the needs of the project. - Collate and download progress as provided by those responsible for the execution of the work. - Progress reporting including man-hour, progress and productivity reports/histograms/fully developed working plan/s-curves/forecasts - Identify areas where performance is at variance with the baseline plan and discuss corrective action with those responsible for the execution of the work - Support Construction Managers and Completion Managers during regular progress meetings. - Produce ad-hoc plans as required - Interface with cost control department to forecast final man-hour estimates expenditure
Requisition ID
 
2020-79845
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Tengiz
 
Vacancy Type
 
Staff / Permanent
 
 Type of Requisition
 
Professional & Technical
Job TitleIT Lead Hosting & Storage Engineer
WOOD (trading locally as QED International) is currently looking for IT Lead Hosting & Storage Engineer to join our client NCOC in Atyrau 5/2 (for locals/kazakh passport holders) - Deliver, develop, deploy, implement, support, administer, monitor and control of IT Infrastructure and related back-end technology in a consistent, cost effective way to meet the business requirements of Venture companies and any agreed Service Level Agreements (SLAs) or Operating Level Agreements (OLAs). - The planning, implementation and control of IT Infrastructure and related back-end technology service provision. This includes negotiation, implementation and monitoring of service level agreements, and the ongoing management of operational facilities to provide the agreed levels of service, seeking continuously and proactively to improve service delivery. - Takes responsibility for the design, procurement, installation, upgrading, operation, control, maintenance and effective use of IT Hosting & Storage, System Services and Data Center - Infrastructure components and monitors their performance, availability, continuity and capacity. - Supports Venture Hosting & Storage, System Services and DC/DR Infrastructure related contracts, projects & activities in cooperation with respective Team leads, other technical teams and suppliers. - Ensures that departmental key performance indicators (KPIs) are within specified limits. Monitors the integrity and confidentiality of information delivered to and sent by users, the levels of service performance such as throughput, availability and response time. Manages the timely and effective handling of enquiries and requests for guidance, or for investigation, diagnosis and resolution of problems. Ensures projects running within IT Operations scope are strictly aligned with the Venture Project Management & reporting tools. In collaboration with the team leader, implement and maintain documentation related to Venture ITSM Operations policies, strategies, business continuity plans, disaster recovery plans and all other required Venture ITSM Operations documentation. Establishes systems and standards that ensure uniform quality, performance and efficiency of systems and environments. - Makes decisions that are critical in the areas of throughput analysis, problem solving, and infrastructure planning, with the potential to affect the successful execution of business transactions. - Manages various IT Operations projects intended to continually improve/upgrade the Venture Back-end infrastructure. - Provides technical management of IT operations, ensuring that agreed service levels are met and all relevant procedures are adhered to. - Ichedules and supervises all maintenance and configuration works related to Hosting & Storage Infrastructure components. - Identifies and rectifies a broad range of operational exceptions and error conditions and deals sensibly & responsibly with unexpected or extraordinary events or incidents, as directed by Incident Management function.
Requisition ID
 
2020-79811
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Agency / Contract
 
 Type of Requisition
 
Professional & Technical
Job TitleSystem Completions Document Administrator
Wood (trading locally as PSNK) is currently looking for a Systems Completions Document Administrator (for KZ Nationals) to join our team in Tengiz. We are looking for candidates with the drive and commitment to make a genuine difference to our performance to ensure that the company continues to differentiate itself from competitors by delivering quality projects to our client’s requirements The position requires a self-motivated individual who is able to work within a multi-discipline team environment and is capable of coordinating and interfacing with multiple teams associated with project requirements. The associated project requirements cover documentation, checklists and reports for SAT, commissioning support and technical aspects of the Process Automation System (PAS).   SC Documentation Administrator will have the primary responsibility for preparing workpacks, SAT and other documents, Checksheets, Work method statements and Reports for the delivery of the project scope within a specified area associated with; - Implementation of all HSE requirement for the System Completions team - Compliance with project standards, specifications and procedures - Co-ordination of all documents associated with SAT activities and Commissioning activities for discipline engineers and vendor engineers - Effective communication, reporting and escalation of issues   This role will support the preparation of the Technical Documentation, Checklists, Work method Statements, Punch Lists and Reports required for the systems completions process for PAS PCS SAT activities, Pre-Commissioning and Commissioning on the Gathering Clusters 53 thru to 55, 3GP, 3GI, IOCC project and including Brownfield tie-ins. The DCC Administrator will report to the Field Team Lead(s) and Field Execution Lead   The individual will have the following key accountabilities, responsibilities. - Implementation of all HSE requirement within the System Completions team. - Prepare Work Packs, Technical Documentation and Checklists in readiness for the Field Executuion teams to perform Site Acceptance Test (SAT), SAT check sheets and punch list close out activities. - Responsible for preparing documents in readiness to meet scheduled targets in assigned areas. - Access Documentum to download the latest revision documents required in the preparation of PAS PCS SAT, Pre-Commissioning and Commissioning, activities. - Accessing and entering Punch List items into McPlus and generating reports as required. - Ensuring standards are maintained and the integrity of the documentation and data, including the clients cyber security directives (CIRS). - Assist PAS Engineers with completeness of any document redlines (basis for as-building) for the assigned area. - Maintain effective communication and reporting to the Field Team Leads to ensure meeting of project requirements and schedule. - Ensure Systems Completions procedures and processes are followed in alignment with project specifications, procedures and management of change.
Requisition ID
 
2020-79797
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Tengiz
 
Vacancy Type
 
Staff / Permanent
 
 Type of Requisition
 
Professional & Technical
Job TitleCondition Monitoring Engineer
rhi (trading locally as QED International) is currently looking for Condition Monitoring Engineer to join our client NCOC in Atyrau (for locals/kazakh passport holders). - Develop Condition Monitoring Strategy and Preventive Maintenance Procedures (PML) in compliance with Kazakh Regulations and Company Standards. - Develop and implement a Predictive and Proactive condition based monitoring systems and deliver periodic equipment performance and condition assessment reporting. - Provide expert analysis and support to the asset teams on the spread of condition assessment techniques. - Identify and diagnose of developing defects in equipment. Where required to make visit to the assets to assist in data gathering and diagnosis. - Carry out detailed analysis of condition based data in the event of equipment failures and perform repair works (such as equipment balancing) where assistance is required at site. - Identify, propose and support the implementation of improved CBM techniques and best practices. - System custodian for the Remote Monitoring Data Acquisition System (RDAS) and execute a program to verify the quality of data in the RDAS system. - Determine and implement in RDAS the alarm levels for equipment condition based parameters. - Manage and ensure availability of software alarms, machinery information, base lines data, start-up / shutdown data (for critical machines) and historical data in on line and offline machinery management systems. - Review Online Vibration data and Thermodynamic performance of critical rotating machines and generate reports and trigger necessary actions . - Provide monthly exception reports of condition based data for input to the monthly assest reliability report. - Lead site condition monitoring teams and ensure quality, compliance & timeliness aspect of the activities as per relevant applicable procedures. - Provide Advance Vibration Analysis support as and when required by the assets. - Ensure Condition Monitroing tools (hardware and software) are available, well maintained and timely upgraded. - Ensure participation and engagement of the team for RCA / RCM process as and when required by the assets. - Assist engineering/maintenance Technical Authority TA1/2 for all issues related to condition monitoring systems. - Act as Contract Holder for Condition Monitoring Contracts such as Bently Nevada Site Support Agreement and Advance Vibration Analysis. Define the scope of work and progress contracts for services related to condition monitoring activities. - Ensure allocation and effective control of annual budgets for execution of Preventive and Predictive Maintenance Programs and a contingency for Corrective Maintenance.
Requisition ID
 
2020-79684
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Agency / Contract
 
 Type of Requisition
 
Professional & Technical
Job TitleMaterials & Corrosion engineer
rhi (trading locally as QED International) is currently looking for Materials & Corrosion Engineer to join our client NCOC in Atyrau (for locals/kazakh passport holders).   • Implement Corrosion Monitoring and mitigation plans. • Provide options and recommendations relating to corrosion engineering issues. • Identify key/critical process and material to be used. • Execute procedures and plans in order to control corrosion levels • Support Materials/Corrosion Activities in RBI process • Provide support in the development of the CMS / IMS and its interaction with the OIS (particularly CMMS) • Assist in the definition of plant modifications related to Material/corrosion • Provides Materials & Corrosion support to Operation, and requires an effective interface with the Operations organization for Process facilities and/or Asset Managers for Infrastructure facilities. Level II: • Under supervision, performs work that is varied and that may be somewhat difficult in character, but usually involves limited responsibilities. • Some evaluation, originality or ingenuity is required.  
Requisition ID
 
2020-79683
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Agency / Contract
 
 Type of Requisition
 
Professional & Technical
Job TitleContracts Holder Support Advisor
rhi (trading locally as QED International) is currently looking for Contracts holder Support Advisor to join our client NCOC in Atyrau (for locals/kazakh passport holders). - Assist Contract Holder in identification of future Contracts requirements, raise Long Term Procurement Outlook (LTPO) creation request - Assist Contract Holder in preparation of Contract strategy, together with CP and in support of Contract Holder participate at Contract Strategy workshop, support Contract Holder in representing Contract Strategy at respective Contracts Board - Raise Contract Requisition Forms and monitor Requisition approval process, assist Contract Holder in drafting Contracts Board Submissions in a timely and complete manner and help to represent them at respective Contracts Board - Assist in compilation of appropriate documentation package for either Contract Amendments or New Tender processes, including scope of work, company estimates, bid lists, instructions to tenderers , technical evaluation criteria etc. - Raise Vendor Pre-qualification requests and submit of Vendor feedback reports Review and verify Contractor’s invoices on their compliance with contract requirements - In support of Contract Holder Prepare monthly Value of Work Done (VOWD) numbers to enable accurate assessment of accruals - Assist Contract Holder in administering changes and variation orders, and reviewing claims in collaboration with CP function - Assist Contract Holder in ensuring Contractor compliance with Contract Terms & Conditions, Scope of Work / Services by monitoring key deliverables, milestones, KPI’s and Project Schedule. - Perform post award contract administration activities including and not limited to supporting Contract Holder in liaising with contractors to specify requirement, issue requests for services, evaluate quotes provided, analyse of balance of value to complete work, keeping routine/Add Hoc correspondence, minute meetings, etc. - Liaise with Contracts and Procurement, Legal, Finance, Tax and Cost Engineering and Project Engineers to support a smooth and effective contract implementation, administration and management process - Be accountable for running of the reports: Local content Report, Contractors’ performance Feedback reports, etc. - Provide all the necessary support documentation to certify the actual quantity of services and/or goods received by Company to SPU team enabling them to create Service Entry/Goods receipt transactions in SAP BLP; - Assist CP with performing Contract ‘Close Out’, document Lessons Learned  
Requisition ID
 
2020-79590
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Agency / Contract
 
 Type of Requisition
 
Professional & Technical
Job TitleLead Process Engineer
Wood (trading locally as PSNK) is currently looking for a Lead Process Engineer to join our team in Atyrau (for KZ passport holders).   Function:   Manage process discipline work, designated focal point for projects involving conceptual, feasibility, FEED and detailed design of the onshore and offshore oil and gas facilities. Responsible for Process and Plant analysis, design, specification and services related to production and utility systems and all types of oil field infrastructure. Manage the process input to Basis for Design, Design Reports, Engineering and Technical Studies. Carry out Conceptual studies / Basic design and provide technical support during detailed design phase of the projects for any project related to process plants such as oil & gas production, debottlenecking/capacity enhancement, specialty chemicals, stabilised products, pipeline, utilities, water treatment etc. Requires the use of advanced techniques and modification and extension of theories, principles and practices of the field and related disciplines. Development of process simulation models for the facility to be designed / upgraded and advanced controls/process optimization – Should be familiar with simulators like HYSYS, PIPEFLOW, PIPEPHASE, PIPESIM, FLARENET, FRED  Prepare and co-ordinate Process Engineering deliverables including scope of work, data sheets, flow diagrams and technical reports. Independently perform all conventional design work of the functional area subject matter. Carry out various engineering activities for the above: - Preparation of heat and material balance - Development of process flow diagrams, piping and instrument diagrams, - Finalizing system design parameters / carry out necessary calculations - Specifying equipment/systems such as heat exchangers, vessels, pumps, reactors, etc. and instruments - Prepare Cause & Effect Diagrams, SAFE Charts, Line Lists, Tie-in Schedules - Write Design Philosophies / Operating / Commissioning Guidelines / manuals - Participate in safety reviews like HAZOP, SIL etc - Perform work which involves conventional engineering practice but may include a variety of complex features such as resolution of conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements etc. - Independently applies advanced engineering techniques, makes decisions on engineering problem and methods. - Undertake checking and approval activities in accordance with company procedures. - Undertake internal QA checks on discipline activities and deliverables. - Plan, schedule, and conduct work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. - Plans, budgets and organizes Process group workload / responsibilities for the assigned project Provides training, mentoring and technical guidance to Process Engineers working in the group. Liaise with Clients, Contractors, and Vendors.
Requisition ID
 
2020-79516
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Fixed Term
 
 Type of Requisition
 
Professional & Technical
Job TitleNetwork / Server Engineer
Wood (trading locally as PSNK) is currently looking for a Network / Server Engineer  to join our team in Tengiz. We are looking for candidates with the drive and commitment to make a genuine difference to our performance to ensure that the company continues to differentiate itself from competitors by delivering quality projects to our client’s requirements. The MAC Network Engineer will have primary responsibility for the Process Automation System Network hardware and software Systems hands on configuration and commissioning.   Responsibilities: - Reports to the assigned Area Execution / Field Team test Lead. - Direction from Client Automation System Completions will be followed at the location / building (RIE, FOO and MOA) level. Responsible for: - Ensuring that the supplied Process Control and Safety Manager Network and Servers are installed correctly, powered up, fully functioning, modified when required and completion of all necessary checks and documentation. Main Purpose of the job: - Provides subject matter expertise in the setup, commissioning and configuration and testing of servers and networks. Responsibilities / Duties:   - Where necessary, download server related operating systems, configure server profiles, establish accounts, partition drives, download server related applications and test the above for proper operability - Maintain and update if required relevant project documentation including network architecture drawings, test specifications, hardware drawings and cable schedules associated with the network systems. - Ensure installed systems comply with project design (IP addresses, Windows Active Directory, Group Policies, Virtualization, Cabling Infrastructure. Compliance with project standards for cyber security. - Responsible for technical validation and completeness of any document redlines (basis for as-building) for the assigned area.
Requisition ID
 
2020-79228
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Tengiz
 
Vacancy Type
 
Fixed Term
 
 Type of Requisition
 
Professional & Technical
Job TitleSafety Instrumented Systems / Fire and Gas Systems Engineers (SIS/FGS)
Wood (trading locally as PSNK) is currently looking for a Safety Instrumented Systems / Fire and Gas Systems Engineers (SIS/FGS) to join our team in Tengiz. We are looking for candidates with the drive and commitment to make a genuine difference to our performance to ensure that the company continues to differentiate itself from competitors by delivering quality projects to our client’s requirements The MAC Safety Instrumented Systems / Fire and Gas Systems Engineers (SIS/FGS) will have primary responsibility for the Honeywell Safety Manager Safety Systems (SIS/FGS) hardware and software Systems Configuration (hands on) Site Acceptance Test and Commissioning   Responsibilities: - Reports to the assigned Area Field Execution / Field Team Test Lead. - Direction from Client system Completions will be followed at the location / building (RIE, FOO and MOA) level from Automation Systems Completions (commissioning) on a day to day basis during Pre-Commissioning and Commissioning Responsible For:   - Ensuring that the supplied safety critical systems are installed correctly, powered up, fully functioning, modified when required and completion of all necessary checks and documentation.   Main Purpose of the job: - Perform Site Acceptance Testing (SAT) and pre-commissioning checks on process safety (F&G, ESD and PSD) and control system interfaces. - Provides specialist support when required for the plant start up and on-going commissioning, for example fault finding, de-bugging and application correction. - Undertake system modifications and associated management of change documentation. Responsibilities / Duties: - Actively participates in the installation / configuration / implementation & commissioning of Industrial control & safety systems to meet customer specifications and be able to independently implement (unsupervised) significant modification to these systems. - Undertake system firmware and application updates. - Ensure all testing, modifications are executed in accordance with agreed methodologies completing all necessary checks and paperwork. - Provides accurate progress reporting and completion status. - Responsible for technical validation and completeness of any document redlines (basis for as-building) for the assigned area.
Requisition ID
 
2020-79226
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Tengiz
 
Vacancy Type
 
Fixed Term
 
 Type of Requisition
 
Professional & Technical
Job TitleProcess Control System (PCS) Commissioning Engineer
Wood (trading locally as PSNK) is currently looking for a Process Control System (PCS) Commissioning Engineer to join our team in Tengiz. We are looking for candidates with the drive and commitment to make a genuine difference to our performance to ensure that the company continues to differentiate itself from competitors by delivering quality projects to our client’s requirements. - Reports to the assigned Area Field Execution / Field Team Test Lead - Direction from Client system Completions will be followed at the location / building (RIE, FOO and MOA) level Automation Systems Completions (commissioning) on a day to day basis during Pre-Commissioning and Commissioning. Responsible for: - Ensuring that the supplied Process Control System is installed correctly, powered up, fully functional, modification when required and completion of all necessary checks and documentation. Main purpose of job: - Perform site acceptance testing and pre-commissioning checks on process control (PCS/HMI, 3rd party Interfaces) and where applicable the FGS/SIS system interfaces. - Provides specialist support when required for the plant start up and on-going commissioning, for example fault finding, de-bugging and application correction. - Undertake system modifications and associated management of change documentation. Responsibilities / Duties: - Actively participates in the installation / configuration / implementation & commissioning of Industrial control & safety systems to meet customer specifications and be able to independently implement (unsupervised) significant modification to these systems. - Undertake system firmware and application updates. - Ensure all testing, modifications are executed in accordance with agreed methodologies completing all necessary checks and paperwork. - Provides accurate progress reporting and completion status. - Responsible for technical validation and completeness of any document redlines (basis for as-building) for the assigned area.
Requisition ID
 
2020-79225
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Tengiz
 
Vacancy Type
 
Fixed Term
 
 Type of Requisition
 
Professional & Technical
Job TitleLead Instrument Engineer
Wood (trading locally as PSN KazStroy) is currently looking for a Lead Instrument Engineer to join our team in Atyrau (for KZ passport holders only). We are looking for candidates with the drive and commitment to make a genuine difference to our performance to ensure that the company continues to differentiate itself from competitors by delivering quality projects to our client’s requirements.   Responsibilities: - Able to manage and co-ordinate the instrument discipline team and achieve objectives with resources - Evaluate, select, and apply standard engineering techniques, procedures, and criteria, using judgment in making minor adaptations to major modifications - Manage the design of larger and more complex projects which involve conventional types of plans, investigations and surveys with complex features for which there are not precedents - Shall be conversant in preparation of control/ESD/F&G philosophies/specifications, instrument selection and sizing, I/O schedules, load schedules, block diagrams, cause and effects, loop diagrams, instrument data sheets, pneumatic hook-ups - Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations - Participate in safety reviews, HAZOPs and SIL Assessments - Ensure Safety in design and HSE requirements - Undertake checking and approval activities in accordance with company procedures - Undertake internal QA checks on discipline activities and deliverables - Ensure adherence to company /client’s policies, procedures and core values - Assignments usually include the following – either directly or supervising - Control theories and application - Control, safety system, F&G definition and engineering execution - Specification and procurement of field instruments - Specification, procurement and detail design of Control and Safety Systems - Provide technical direction for Instrument Engineers and Designers - Provides training, mentoring and technical guidance to instrument engineers and designers working in the group
Requisition ID
 
2020-79144
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Atyrau
 
Vacancy Type
 
Fixed Term
 
 Type of Requisition
 
Professional & Technical
Job TitleField Team Lead Networks
Wood is currently looking for a Field Team Lead to join our team in Atyrau. We are looking for candidates with the drive and commitment to make a genuine difference to our performance to ensure that the company continues to differentiate itself from competitors by delivering quality projects to our client’s requirements.   The position requires a self-motivated individual who is able to lead a multi-discipline team, within project requirements, with minimum supervision and is capable of coordinating and interfacing with multiple teams associated with the client (TCO) and the internal MAC (PNSK) organisation. The associated project requirements cover SAT, commissioning support and technical aspects of the Process Automation System (PAS).   This role will co-ordinate and support the systems completions process for PAS system infrastructure, configuration and SAT testing activities on the Gathering (Cluster-52), Cluster-53 thru to Cluster-55), 3GP, 3GI, IOCC project and including Brownfield tie-ins. Includes supporting the Pre-Commissioning, Commissioning and Start-Up of PAS systems and will report to the MAC Field Execution Lead.   The individual will have the following key accountabilities and responsibilities.   - Implementation of all HSE requirement for the MAC System Completions team. - Plan and execute the Process Automation System pre-SAT readiness review activities, Site Acceptance Test (SAT), SAT check sheet / punch list close out and client commissioning support. - Responsible for meeting progress targets and schedule compliance in assigned area - Filling in for other MAC Field Team Lead Networks / MAC Field Team Leads / MAC Field Execution Leads during periods of absence or handover/ crew change. - Ensuring standards are maintained and the integrity of the documentation, data and software are maintained, including the clients cyber security directive (CIRS). - Responsible ultimately for technical validation and completeness of any document redlines (basis for as-building) for the assigned area. - Co-ordination and assignment of work-related tasks to team engineers, to action and progress work items according to project schedules. - Preparation of written reports and submission to MAC Field Execution Lead. - Maintain effective communication and reporting to the MAC Field Execution Lead to ensure meeting of project requirements and schedule. - Ensure MAC Systems Completions procedures and processes are followed in alignment with project specifications, procedures and management of change. - Demonstration of leadership, under the direction of the MAC Field Execution Lead, delivering on schedule project scope for systems and sub-systems. - Completion of subsystem check sheets and punch lists, within the client’s completions system.    The individual will have the following key experience.   - Experience with network security – Firewalls, ACL, IDS, IPS & SIEM - Experience in LAN / WAN architecture and related diagnostic tools and wireless networking principles and protocols including Ethernet, TCP/IP, VLAN, WLAN, DMZ, firewalls, switches, routers. - Experience with anti-virus systems, backup & restore functions, system management. - Experience with virtualization such as VMWare. - Maintain cyber security on PAS systems and related certifications. - Experience and knowledgeable of industry security standards such as IEC=62443, ISO 27000 etc. - Work with Client’s PCN Cyber Security Group to maintain and monitor the PAS system security measures as well as providing cyber security plans and documentation. - Lead the planning and execution for the set-up and SAT testing of network infrastructures for PAS systems at remote RIEs and Field Office Operational Buildings. - Critical thinking skills and problem-solving aptitude - Lead implementation, testing, troubleshoot and maintenance of complex firewall configurations and cyber security policies for PAS systems. - Proactively lead the identification and resolution of network and cyber security issues with PAS systems before they become critical. - Technical focal point for supervisory and technical queries related to system configuration and network. - Develop conceptual sketches / drawings as necessary to determine the most simple, efficient approach to solving network engineering issues and shortcomings. - Establish and / or update processes to ensure the latest revisions of network and PAS system documentation are utilized by Engineers for the set-up and testing of PAS systems and are Red Lined Marked-up (RLMU) to reflect all design changes. - Demonstrated experience with ethernet, VPN, wireless, TCP/IP
Requisition ID
 
2020-78258
 
Multi-Locations
 
No
 
Country
 
Kazakhstan
 
City
 
Tengiz
 
Vacancy Type
 
Fixed Term
 
 Type of Requisition
 
Professional & Technical
 
 
John Wood Group plc is a multinational energy services company with headquarters in Aberdeen,Get all the information about Wood PLC (Wood), a company operating mainly in the Electric Power, Oil & Gas, Infrastructure and Mining & Metals sector. Connect with its key contacts, projects, shareholders, related news and more
https://naftonline.ir/news/22116/
منبع : OilIndustry.ir
ارسال نظر
نام شما
آدرس ايميل شما